Description
Nanofader v1.2 by Rasteri
The Nanofader is an opensource crossfader circuit designed by Rasteri.
When used with portable turntables, this circuit provides popless cutoff for most internal crossfaders, adds an auxiliary input for a looper, and adds bass kill.
Circuit details can be found on Rasteri’s site here
The install guide can be found on Rasteri’s site here
A fader guide can be found on Rasteri’s site here
See the Bass Kill Switch Wiring Guide for bass kill wiring instructions.
Features:
-Popless zero crossing cutoff
-Bass Kill (removes low frequencies of audio input only)
-Auxiliary audio input (for looper, not affected by cutoff)
-Works with most crossfaders
-Built and tested by Beat Shelter
Kit includes:
-Nanofader v1.2 (built and tested)
Requirements:
-Wire for power connection
-Wire and female TRS 3.5mm connector for auxiliary input connection
-Wire for audio input/output connections
-Wire and switch for Bass Kill (optional)
-Soldering iron and solder
-Mounting hardware or thick double sided tape for mounting